Varistor & MOV
A varistor is an electronic component with an electrical resistance that varies with the applied voltage.[2] Also known as a voltage-dependent resistor (VDR), it has a nonlinear, non-ohmic current–voltage characteristic that is similar to that of a diode. In contrast to a diode however, it has the same characteristic for both directions of traversing current. Traditionally, varistors were indeed constructed by connecting two rectifiers, such as the copper-oxide or germanium-oxide rectifier in antiparallel configuration. At low voltage the varistor has a high electrical resistance which decreases as the voltage is raised. Modern varistors are primarily based on sintered ceramic metal-oxide materials which exhibit directional behavior only on a microscopic scale. This type is commonly known as the metal-oxide varistor (MOV).
Varistors are used as control or compensation elements in circuits either to provide optimal operating conditions or to protect against excessive transient voltages. When used as protection devices, they shunt the current created by the excessive voltage away from sensitive components when triggered.
Showing all 2 resultsSorted by latest
-
![MOV-511K/20D (Metal Oxide Varistor)[ 15 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/10/511K-scaled-300x225.webp)
- SOLD OUT
![Varistor S20K510 [ 15 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/10/s20k510-scaled-300x225.webp)
![C15 Sod-80 15 Volt Ziner Diode [ 50 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/03/40-300x225.jpg)