![74HC595 8-bit Serial to Parallel Shift Register IC (74595 IC) DIP-16 [ 10 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/12/74hc595-dip-scaled.webp)
The 74HC595 high speed shift register utilizes advanced silicon-gate CMOS technology. This device possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has 8 3-STATE outputs. Separate clocks are provided for both the shift register and the storage register.
The shift register has a direct-overriding clear, serial input, and serial output (standard) pins for cascading. Both the shift register and storage register use positive-edge triggered clocks. If both clocks are connected together, the shift register state will always be one clock pulse ahead of the storage register. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Features:-
• Low quiescent current: 80 µA maximum (74HC Series)
• Low input current: 1 µA maximum
• 8-bit serial-in, parallel-out shift register with storage
• Wide operating voltage range: 2V–6V
• Shift register has direct clear
• Guaranteed shift frequency: DC to 30 MHz
Specifications:-
| Parameter | Specification |
| Supply Voltage (VCC | − 0.5 to + 7.0V |
| Input Voltage (VIN) | −1.5V to VCC + 1.5V |
| Output Voltage (VOUT) | − 0.5 to VCC + 0.5V |
| Clamp Diode Current (IIK, IOK) | ± 20 mA |
| DC Output Current, per pin (IOUT) | ± 35 mA |
| DC VCC or GND Current, per pin (ICC) | ± 70 mA |
| Storage Temperature Range (TSTG) | − 65°C to + 150°C |
| Power Dissipation (PD) (Note 4) | 600 mW |
| S.O. Package only | 500 mW |
| Lead Temperature (TL) (Soldering 10 seconds) | 260°C |
![MOC3021 IC - Non Zero Crossing Optocoupler | 3021 ic [ Original ON Brand ][ 10 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/06/3021-300x225.webp)
![HIP4082IPZ New DIP IC ( equivalent ISL83202IPZ ) || 80V, 1.25A Current H-Bridge FET Driver [ 2 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2021/04/4082-ic-scaled-300x225.webp)
![3525 Dip IC U3525L DIP16 [ 10 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2021/04/3525-ic-300x225.webp)
![NE555 Original IC || DIP IC [ 10 Pieces Pack ]](https://tufonlinestore.com/wp-content/uploads/2020/08/555-dip-ic-300x225.webp)
CoreyNom –
This year turned out to be very difficult. But we have optimized and reduced the cost of our products!
It is almost impossible to find prices lower than ours, the sale is at the cost price level.
Watch and be surprised by our super low prices https://cutt.us/6nChw
Abdul Kalam (verified owner) –
A.k power
AntonioSoats –
Completely I share your opinion. In it something is and it is good idea. It is ready to support you.
Very valuable phrase
The matchless message 😉
I join. And I have faced it.
It is removed
http://mensovann.com/klm/
AntonioSoats –
This example is based on the 74HC595. The datasheet refers to the 74HC595 as an “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your output even more.
RAJEEV GORAIN (verified owner) –